|
PLU |
SH1-01470-HFCF |
|
Power voltage |
3Phase 380-460VAC |
|
Output voltage |
3Phase 380-460VAC |
|
Rated output current |
147A |
|
Power supply frequency |
50/60 Hz fluctuation amplitude ± 5% |
|
Wattage |
75KW (100HP) |
|
Power supply capacity |
133.4kVA |
|
Carrier frequency range |
0.5-10kHz |
|
Setting frequency range |
0Hz-590Hz |
|
Input frequency resolution |
Digital: 0.01Hz |
|
Display |
7-segment LED (5 digits) |
|
Deceleration time |
0-3600s |
|
Control method |
V/F control (Constant torque, Variable torque, free) automatic gain control |
|
Functions |
V/f setting (7 points), upper and lower frequency limit, frequency step, acceleration and deceleration curve, manual torque boost, energy saving operation, output adjustment analog, minimum speed, carrier frequency adjustment, motor electronic thermal function, inverter thermal function, frequency input selection, restart pause, various signal output, initialization setting, PID control, automatic shut-off, brake control function, auto-tuning (on/offline), etc. |
|
Input terminal |
AI1/AI2: 12bit / 0~10V or 0~20mA, AI3: 12bit/-10~+10V |
|
Output terminal |
Transistor output 5, 1c relay output |
|
Communicate |
RS485 communication (Ethernet (Modbus TCP/IP), EtherCAT. PROFIBUS DP, PROFINET. DeviceNet, CANopen) |
|
Protection function |
Overcurrent error, overcharge error, brake resistor overload, overvoltage error, memory error, undervoltage error, current probe CPU error, external trip error, USP error, ground error, power overvoltage error, error power loss, temperature detection error, cooling fan rotation speed reduction, temperature error, phase input error, IGBT error, phase output error, thermistor error, brake error, low speed range overload error, over inverter load, RS485 communication error, RTC error, etc |
Inquiry - SH1-01470-HFCF
