|
Power Supply |
9 Volts PP3 Alkaline Battery |
|
Test Voltage |
Nominal 9 Volts |
|
Temperature Range |
|
|
Operating |
40F to 120F (5C to 49C) |
|
Storage |
(-15C to +60C) |
|
Relative Humidity |
0% to 90% (non-condensing) |
|
Resolution |
One order of magnitude |
|
Changeover Point |
_decade on a logarithmic scale (3.16 * 10n) |
|
Changeover Point Accuracy |
+/-_decade |
|
Accuracy |
+/- 10% |
|
Repeatability |
+/- 5% |
|
Weight |
6 ounces |
|
Dimensions |
130mm * 70mm * 25mm |
To measure surface resistivity :
-
Simply place the meter on the surface of the material that requires measuring.
-
Press the green test button. The meter will then light the appropriate LED from 10 to the power of 3 to 10 to the power of 12 Ohms per square or insulative.
To measure resistance to the ground :
-
Simply place the meter on the surface of the material that requires measuring.
-
Insert the earth wire into the earth socket attaching the alligator clip to ground point.
-
Press the green test button. The meter will then light the appropriate LED from 10 to the power of 3 to 10 to the power of 12 Ohms per square or insulative.
-
The meter uses precise spaced parallel bars to sense its measurements and operates with a 9-volts PP3 battery, which can last more than 40 hours of testing time. Calibration of the unit is recommended and this can be obtain by contacting your dealer.
Inquiry - ESD SURFACE RESISTIVITY METER (WITH 10 LEDS)
