-
FS-V31P
-
Digital Fiber Optic Sensors
-
FS-V30 series
-
Fiber Amplifier
-
Cable Type
-
Main Unit
-
PNP
-
1-output with cable
-
Main unit
-
Control output:1 output
-
Monitor output (1 to 5 V):N/A
-
Light source LED:Red, 4-element LED (Wavelength: 640 nm)
-
Response time:33 ?s (HIGH SPEED)/250 ?s (FINE)/500 ?s (TURBO)/1 ms (SUPER TURBO)/4 ms (ULTRA TURBO)/16 ms (MEGA TURBO)
-
Output selection:LIGHT-ON/DARK-ON (switch-selectable)
-
Display indicator:Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display,
-
Preset Value (4-digit green LED indicator) and
-
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512;
-
Excess gain: 0P to 999P,
-
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
-
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display
-
Detection mode:Light intensity (area detection possible, automatic sensitivity-tracking function provided)
-
Timer function:OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay
-
timer/ON-delay timer + One-shot timer, selectable
-
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.
-
Control output:PNP open-collector 24 V, 100 mA max.*1 (main unit only)/20 mA max. (when the
-
expansion unit(s) is connected), Residual voltage: 1 V max.
-
External inputy:Input time: 2 ms (ON)/20 ms (OFF) min.*2
-
Unit expansion:Up to 16 expansion units can be connected (a total of 17 units). Note that the 2-
-
output type should be counted as two units.
-
Case material:Polycarbonate
-
Accessories:N/A
Inquiry - FS-V31P
