-
Overall length is 4 3/4" (120mm), straight, fine shaped tip
-
Low carbon austenitic steel (material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L)
-
Non-magnetizable
-
Good corrosion resistance to most chemicals, salts and acids
-
Annealed state, 8.0g/cm³ density, <=215 hardness HB30, 79 hardness rockwell B
-
500 to 700Mpa tensile strength (ultimate), 290 tensile strength (yield), <=200Mpa 0.2% yield stress
-
40% elongation, break and 200Gpa modulus of elasticity
-
Specific heat capacity is 0.50J/(g·K), thermal conductivity is 15W/(m·K)
-
Continues use temperature is 350°C and maximum service temperature is 925°C
-
Resistivity is 0.75 E-4 ohm.cm
Inquiry - SM106.SA
